Entanglement storage in atomic ensembles

We propose to entangle macroscopic atomic ensembles in cavity using EPR-correlated beams. We show how the field entanglement can be almost perfectly mapped onto the long-lived atomic spins associated with the ground states of the ensembles, and how it can be retrieved in the fields exiting the cavities after a variable storage time. Such a continuous variable quantum memory is of interest for manipulating entanglement in quantum networks

Continuous variable entanglement using cold atoms

We present experimental demonstration of quadrature and polarization entanglement generated via the interaction between a coherent linearly polarized field and cold atoms in a high finesse optical cavity. The non linear atom-field interaction produces two squeezed modes with orthogonal polarizations which are used to generate a pair of non separable beams, the entanglement of which is demonstrated by checking the inseparability criterion for continuous variables recently derived by Duan et al. [Phys. Rev. Lett. 84, 2722 (2000)] and calculating the entanglement of formation [Giedke et al., Phys. Rev. Lett. 91, 107901 (2003)]

Cantilever-based Resonant Gas Sensors with Integrated Recesses for Localized Sensing Layer Deposition

This work presents mass-sensitive hammerhead resonators with integrated recesses as a gas-phase chemical microsensor platform. Recesses are etched into the head region of the resonator to locally deposit chemically sensitive polymers by ink-jet printing. This permits the sensing films to be confined to areas that (a) are most effective in detecting mass loading and (b) are not strained during the in-plane vibrations of the resonator. As a result of the second point, even 5-μm thick polymer coatings on resonators with a 9-12 μm silicon thickness barely affect the Q-factor in air. This translates into higher frequency stability and ultimately higher sensor resolution compared to uniformly coated devices

Entanglement and squeezing in a two-mode system: theory and experiment

We report on the generation of non separable beams produced via the interaction of a linearly polarized beam with a cloud of cold cesium atoms placed in an optical cavity. We convert the squeezing of the two linear polarization modes into quadrature entanglement and show how to find out the best entanglement generated in a two-mode system using the inseparability criterion for continuous variable [Duan et al., Phys. Rev. Lett. 84, 2722 (2000)]. We verify this method experimentally with a direct measurement of the inseparability using two homodyne detections. We then map this entanglement into a polarization basis and achieve polarization entanglement.Comment: submitted to J. Opt. B for a Special Issue on Foundations of Quantum Optic

If you don’t take it – it can’t work: the consequences of not being treated or nonadherence to osteoporosis therapy

Osteoporosis is a growing problem worldwide, linked to an increasingly aging population. Despite the availability of a wide variety of treatments for osteoporosis, a significant number of patients are either not being prescribed treatment or discontinue therapy as early as 6 months after initiation. The reasons for a lack of adherence are many but poor adherence increases the risk of fracture and, therefore, the disease burden to the patient and society. Results from large-scale, randomized clinical studies have shown that different osteoporosis treatments are efficacious in reducing the risk of fracture. Studies assessing the effects of discontinuing osteoporosis therapies show that some treatments appear to continue to protect patients from the risk of future fracture even when treatment is stopped. However, these trials involve patients who have been compliant with treatment for between 2 and 5 years, a situation not reflective of real-world clinical practice. In reality, patients who discontinue therapy within the first 6 months may never achieve the optimum protection from fracture regardless of which treatment they have been prescribed. Clinicians need to develop management strategies to enable patients to adhere to their treatment. This will ultimately result in better prevention of fracture and a lower burden of disease to society and patients

Many-body quantum dynamics of polarisation squeezing in optical fibre

We report new experiments that test quantum dynamical predictions of polarization squeezing for ultrashort photonic pulses in a birefringent fibre, including all relevant dissipative effects. This exponentially complex many-body problem is solved by means of a stochastic phase-space method. The squeezing is calculated and compared to experimental data, resulting in excellent quantitative agreement. From the simulations, we identify the physical limits to quantum noise reduction in optical fibres. The research represents a significant experimental test of first-principles time-domain quantum dynamics in a one-dimensional interacting Bose gas coupled to dissipative reservoirs.Comment: 4 pages, 4 figure

A linear CO chemistry parameterization in a chemistry-transport model: evaluation and application to data assimilation

This paper presents an evaluation of a new linear parameterization valid for the troposphere and the stratosphere, based on a first order approximation of the carbon monoxide (CO) continuity equation. This linear scheme (hereinafter noted LINCO) has been implemented in the 3-D Chemical Transport Model (CTM) MOCAGE (MOdèle de Chimie Atmospherique Grande Echelle). First, a one and a half years of LINCO simulation has been compared to output obtained from a detailed chemical scheme output. The mean differences between both schemes are about ±25 ppbv (part per billion by volume) or 15% in the troposphere and ±10 ppbv or 100% in the stratosphere. Second, LINCO has been compared to diverse observations from satellite instruments covering the troposphere (Measurements Of Pollution In The Troposphere: MOPITT) and the stratosphere (Microwave Limb Sounder: MLS) and also from aircraft (Measurements of ozone and water vapour by Airbus in-service aircraft: MOZAIC programme) mostly flying in the upper troposphere and lower stratosphere (UTLS). In the troposphere, the LINCO seasonal variations as well as the vertical and horizontal distributions are quite close to MOPITT CO observations. However, a bias of ~−40 ppbv is observed at 700 Pa between LINCO and MOPITT. In the stratosphere, MLS and LINCO present similar large-scale patterns, except over the poles where the CO concentration is underestimated by the model. In the UTLS, LINCO presents small biases less than 2% compared to independent MOZAIC profiles. Third, we assimilated MOPITT CO using a variational 3D-FGAT (First Guess at Appropriate Time) method in conjunction with MOCAGE for a long run of one and a half years. The data assimilation greatly improves the vertical CO distribution in the troposphere from 700 to 350 hPa compared to independent MOZAIC profiles. At 146 hPa, the assimilated CO distribution is also improved compared to MLS observations by reducing the bias up to a factor of 2 in the tropics. This study confirms that the linear scheme is able to simulate reasonably well the CO distribution in the troposphere and in the lower stratosphere. Therefore, the low computing cost of the linear scheme opens new perspectives to make free runs and CO data assimilation runs at high resolution and over periods of several years

Study of Viscoelastic Effect on the Frequency Shift of Microcantilever Chemical Sensors (proceedings)

Microcantilevers coated with a chemically sensitive layer are increasingly being used in chemical detection systems. The sensitive coating, often a polymer, absorbs specific molecules, which can be detected by monitoring the shift in the mechanical resonant frequency. Usually, the frequency shift resulting from molecular absorption is interpreted as a mass loading effect. However, mass loading is not the only effect that has an impact on the frequency shift; the viscoelastic properties of the sensitive coating are also affected by the sorption process. Sorption-induced modulus changes are typically difficult to characterize. However, it is known that the sorption of analyte molecules in a polymer coating results in the plasticization of the coating. In most cases, the polymer becomes more rubbery with increasing concentration of analyte molecules, i.e., the coating becomes softer with increasing loss modulus while the storage modulus decreases. Using a new analytical model developed for the resonant frequency expression of a hybrid microcantilever (elastic base and viscoelastic layer), the effects of the modification of the storage and loss moduli of the sensitive layer on the resonant frequency are examined. The main conclusion of this analytical study is that, even if the sensitive coating moduli are small compared to the base cantilever\u27s Young\u27s modulus, the effect of the change in the viscoelastic coating properties could contribute significantly to the overall frequency shift (8-23% in the simulations depending on the coating thickness, with even higher contributions for other sets of problem parameters)

Effect of Viscoelasticity on Quality Factor of Microcantilever Chemical Sensors: Optimal Coating Thickness for Minimum Limit of Detection

Microcantilevers with polymer coatings hold great promise as resonant chemical sensors. It is known that the coated cantilever sensitivity increases with coating thickness; however, the drawback of increasing the coating thickness is the increase of the frequency noise and thus the deterioration of the sensor\u27s limit of detection. In this paper, an analytical expression for the viscoelastic losses in the coating, hence the quality factor is established and is used to explain the observed increase of the frequency noise with the polymer thickness. This result is then used to demonstrate that an optimum coating thickness exists that minimise the limit of detectio

N=2 consistent truncations from wrapped M5-branes

We discuss consistent truncations of eleven-dimensional supergravity on a six-dimensional manifold M, preserving minimal N = 2 supersymmetry in five dimensions. These are based on GS ⊆ USp(6) structures for the generalised E6(6) tangent bundle on M, such that the intrinsic torsion is a constant GS singlet. We spell out the algorithm defining the full bosonic truncation ansatz and then apply this formalism to consistent truncations that contain warped AdS5 ×w M solutions arising from M5-branes wrapped on a Riemann surface. The generalised U(1) structure associated with the N = 2 solution of Maldacena-Nuñez leads to five-dimensional supergravity with four vector multiplets, one hypermultiplet and SO(3) × U(1) × ℝ gauge group. The generalised structure associated with “BBBW” solutions yields two vector multiplets, one hypermultiplet and an abelian gauging. We argue that these are the most general consistent truncations on such backgrounds